Return to search

Investigation of Photodetector Optimization in Reducing Power Consumption by a Noninvasive Pulse Oximeter Sensor

Noninvasive pulse oximetry represents an area of potential interest to the army, because it could provide cost-effective, safe, fast and real-time physiological assessment in a combat injured soldier. Consequently, there is a need to develop a reliable, battery-powered, wearable pulse oximeter to acquire and process photoplethysmographic (PPG) signals using an optimized sensor configuration. A key requirement in the optimal design of a wearable wireless pulse oximeter is low power management without compromising signal quality. This research investigated the advantage gained by increasing the area of the photodetector and decreasing the light emitting diode (LED) driving currents to reduce the overall power requirement of a reflectance mode pulse oximeter sensor. In vitro and preliminary in vivo experiments were conducted to evaluate a multiple photodetector reflectance sensor setup to simulate a varying detection area. It was concluded that a reflection pulse oximeter sensor employing a large area photodetector is preferred over a similar transmission type sensor for extending the battery life of a wireless pulse oximeter intended for future telemedicine applications.

Identiferoai:union.ndltd.org:wpi.edu/oai:digitalcommons.wpi.edu:etd-theses-1107
Date16 January 2004
CreatorsPujary, Chirag Jayakar
ContributorsYitzhak Mendelson, Advisor, Ross D. Shonat, Committee Member, Peder C. Pedersen, Committee Member
PublisherDigital WPI
Source SetsWorcester Polytechnic Institute
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceMasters Theses (All Theses, All Years)

Page generated in 0.0018 seconds