Low dimensional nanostructures of zinc oxide (ZnO), cupric oxide (CuO), and their composite nanostructures possess remarkable physical and chemical properties. Fundamental understanding and manipulation of these unique properties are crucial for all potential applications. Integration of nanostructured ZnO and CuO and their hybrid composites may play a significant role in the existing technology while paving the way for new exciting areas. Solution based low temperature synthesis of ZnO and CuO nanostructures have attracted extensive research efforts during the last decade. These efforts resulted in a plenteous number of nanostructures ranging from quantum dots into very complex three dimensional nanomaterials. Among the various low temperature synthesis methods the hydrothermal technique became one of the most popular approaches. The use of hydrothermal approach enabled the synthesis of diversity of nanomaterials on conventional and nonconventional substrates such as metals, glass, plastic and paper etc. The primary objectives of this thesis are to study and understand the characteristics of nanostructured ZnO, CuO, and their hybrid composites synthesized at low temperature. Likewise, the hybrid composites were successfully utilized to fabricate light emitting diodes and sensors. This thesis is organized into three major parts. In the beginning the synthesis and characterization of nanostructured ZnO, CuO, and their composite nanostructures are elaborated. Efforts have been made to understand the selective assembly of hierarchical CuO nanostructures on ZnO nanorods and to correlate it to the observed unique properties of the CuO/ZnO composite nanostructures. In the second part of the thesis fabrication, characterization, and device application of ZnO/p-polymer hybrid light emitting diode (HyLEDs) on flexible substrates are presented. In particular single and blended p-type light emissive polymers were controllably developed for potential greener and cheaper white light emitters. It was found that the HyLEDs exhibited rectifying diode characteristics together with white light emission covering the entire visible range. In the third part, pH and relative humidity sensing applications of CuO nanoflowers, and CuO/ZnO nanocorals, respectively, are described. A pH sensor based on CuO nanoflowers demonstrated good sensitivity and reproducibility over a wide range of pH. By taking the advantages of the selective growth of CuO nanostructures on ZnO nanorods and their naturally formed p-n heterojunction the realization of high sensitivity humidity sensor was achieved. The humidity sensor fabricated from the CuO/ZnO nanocorals displayed the highest sensitivity factor reported so far for its constituent materials; along with reasonably fast dynamic responses. A brief outlook into future challenges and opportunities are also presented in the last part of the thesis. / Nanophotonics
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-85111 |
| Date | January 2012 |
| Creators | Elsharif Zainelabdin, Ahmed ELtahir |
| Publisher | Linköpings universitet, Fysik och elektroteknik, Linköpings universitet, Tekniska högskolan, Linköping |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Linköping Studies in Science and Technology. Dissertations, 0345-7524 ; 1484 |
Page generated in 0.0023 seconds