Underground mining can be summarized as the removal of economically viable volumes of rock which creates underground voids. In order to optimize ore extraction, a material is used to backfill these openings prior to creating any adjacent openings. The use of cemented paste backfill (CPB), a mixture of mine tails, water, and cement binder, has gained prominence as it not only provides a material that has engineered strength and can be deployed rapidly, but also decreases the surface storage volume of the mine tails.
There is limited knowledge about the behavior of the stresses within the CPB during the filling of an underground opening, particularly during the early curing ages of the hydrating CPB which is critical to the design of fill barricades. This thesis presents a design procedure which can be used to determine the in situ stresses within the CPB.
Three methodologies were used in the development of this design procedure. The first was to develop a laboratory testing method that determined the time-dependent consolidation characteristics and strength parameters of the hydrating cemented paste material. The second was to collect several field-data sets. The third methodology was to numerically model the CPB using Itasca’s FLAC3D, which incorporated the underground void’s geometry, backfilling strategy, and time-dependent backfill parameters in order to determine the in situ stresses of the CBP. This simulation allowed for the prediction of both total and effective stress throughout the stope.
The model and the laboratory results were used to model the stresses in several test stopes so that a comprehensive comparison could be made between the model and field instrumentation results. Four case studies were examined using a total of six different field instrumentation datasets. The results from these case studies showed that the modeling approach, given some model calibration, is capable of quantitatively representing the important geomechanical aspects of paste filling and curing.
| Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/36027 |
| Date | 13 August 2013 |
| Creators | Veenstra, Ryan Llewellyn |
| Contributors | Grabinsky, Murray, Bawden, William |
| Source Sets | University of Toronto |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds