Engineering activities by nature are collaborative endeavors. Single-user applications like CAD, CAE, and CAM force a strictly serial design process, which ultimately lengthens time to market. New multi-user applications such as NXConnect address the issue during the design stage of the product development process by enabling users to work in parallel. Multi-user collaborative tool path planning software addresses the same serial limitations in tool path planning, thereby decreasing cost and increasing the quality of manufacturing processes. As part complexity increases, lead times are magnified by serial workflows. Multi-user tool path planning can shorten the process planning time. But, to be effective, it must be possible to intelligently decompose the manufacturing sequence and distribute path planning assignments among several users. A new method of process decomposition is developed and described in this research. A multi-user CAM (MUCAM) prototype was developed to test the method. The decomposition process and MUCAM prototype together were used to manufacture a part to verify the method.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-7251 |
| Date | 01 March 2016 |
| Creators | Priddis, Andrew Scherbel |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | All Theses and Dissertations |
| Rights | http://lib.byu.edu/about/copyright/ |
Page generated in 0.002 seconds