Traditionally, destructive methods such as coring are used for the condition assessment of an existing concrete structure. Although these methods may yield valid data about the corresponding concrete section, they are quite expensive and time consuming. More important than these, destructive methods damage the structure being investigated and these points usually become focal points for further deterioration. For all these reasons, only a few samples can be collected from a structure and this results in a poor representation of the complete structure.
The impact-echo technique is one of the most suitable non-destructive test methods that may be used on concrete for thickness determination or for investigation of possible delaminations in the internal parts of a concrete structure without damaging the surface. It has been observed that reliable results can be obtained quickly. Unlike pulse-echo tests which are commonly used on steel, testing a heterogeneous material like concrete requires the use of low frequency sound waves as in impact-echo, in order to mitigate the effects of paste-aggregate interfaces or small air voids.
This method may be used to locate internal cracks or large air voids existing in concrete. It is known that impact-echo has been used successfully on structures with varying geometries and various purposes such as evaluation of concrete pavements, retaining walls and other reinforced concrete sections. Besides the investigation of the internal state, it may also be used when the other side of the section cannot be reached, as in the case of concrete pavements, in order to find the thickness of the section. This is especially important for quality control and for cost calculations.
Research conducted in this thesis study was concentrated on the thickness determination of existing concrete pavement sections, produced in the laboratory with dimensions of 1500 x 2000 mm four and varying thicknesses, and the accuracy associated with these results. In order to correctly determine the sensitivity, several other parameters were investigated and optimum ranges were determined for these to be used while on a field test. Among these factors were the steel impactor size, accuracy related to the data acquisition, distance between the impact point and the transducer and the location of the test point.
Finally, the accuracy of the impact-echo method for concrete pavement applications was studied. By observing the large number of data points collected, it was found out that an average error of 1.5% exists for a single impact-echo reading regardless of section thickness, but this value reduces to 0.6% when the average of all test results is used while determining pavement thickness. Results of this study show that the impact-echo technique is reliable and may be used with success for the thickness determination of concrete pavements and for locating internal voids.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12608423/index.pdf |
| Date | 01 June 2007 |
| Creators | Aktas, Can Baran |
| Contributors | Yaman, Ismail Ozgur |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0021 seconds