Field pea is the most produced and exported pulse crop in Canada, and makes a major contribution to Western Canadian agricultural diversification programs. Canada is now the world largest exporter of pea, lentil and chickpea and is fourth in dry bean. The demand for Canadian pulse products is steadily rising and the export market would continue to rise with the expected increased in production. Field pea exported to countries with tropical climates is at particular risk due to rapid loss of quality. It is therefore important to develop practical strategies for safe storage of feed pea. Knowledge on the moisture adsorption and spoilage characteristics of pea stored in adverse storage conditions is important in the transportation and storage of this export commodity. <p> This study was initiated to examine the conditions that lead to quality losses in storage and transport of pea. Tropical and subtropical conditions were simulated in airtight chambers. Relative humidities (RH) of 60, 70, 80 and 90% were created by saturated salt solutions in airtight chambers at temperatures of 10, 20 and 30°C, while the same range of humidity was provided by dilute sulphuric acid in airtight chambers at 40°C in environmental cabinets. The four RH levels at each temperature for both whole and feed-grade pea were tested in duplicate. The samples were observed for changes in moisture content (MC), mold appearance and RH in specific time intervals. The amount of produced carbon dioxide (CO2) was measured in airtight chambers during storage to control the condition existing in sealed airtight chambers. Also, all components of feed-grade pea were exposed to RH of 90% and temperature of 40°C in separate airtight chambers to find the effect of each component on mold appearance. Molds were identified after appearance on the samples in order to pinpoint potential toxicity. <p> Both feed and whole sound peas became molded after a short time of storage at high temperatures and high RH, but those stored at 70% and below did not develop mold after 175 days at 30 and 40°C (experiment duration) and 216 days at 10 and 20°C (experiment duration). Molds were identified mostly as species of Aspergillus and Penicillium. The amount of CO2 in the airtight chambers showed almost no difference from the ambient CO2 except at high temperature and high RH when samples had gone molded. <p> Moisture adsorption equations were developed based on the moisture adsorption data in dynamic environment. Although the Page model showed to fit the data better, the exponential model was chosen to fit the data because its parameters can be better expressed as a function of temperature and RH of the storage environment. <p> The mold-free days for both feed pea and clean pea were modeled at temperatures of 10, 20, 30 and 40°C and RH of 80 and 90%.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-05132005-155034 |
| Date | 18 May 2005 |
| Creators | Dadgar, Samira |
| Contributors | Tabil, Lope G., Meda, Venkatesh, Baik, Oon-Doo |
| Publisher | University of Saskatchewan |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-05132005-155034/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0023 seconds