The Norwegian Network Code FIKS from the Norwegian Transmission System Operator (TSO) Statnett, states that synchronous generators ≥ 25 MVA must have a static excitation system. It also includes requirements on the step time response and the available field winding ceiling voltage of the excitation system. An improved brushless excitation system is in operation in some pilot power plants. A rotating thyristor bridge is controlled via Bluetooth. The step time response is as fast as conventional static excitation systems. However, a ceiling voltage factor of 2 requires the thyristor bridge to operate at firing angles about 60 degrees. High torque pulsations, low power factor and low utilization of the exciter is the end result. New power electronic interfaces on the shaft results in a betterutilization of the designed exciter and improves the mechanical performance as well as the controllability of the generator field winding. Permanent magnet rotating exciters increase the field forcing strength of the synchronous generator, yielding improved transient stability (Fault Ride-Through req.). Brushless exciters also reduces regular maintenance of the generator. The thesis includes experiments on a state of the art synchronous generator test setup including constructed PM exciter and different power electronic solutions. Some investigations has been done on industrial power plants as well.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-292835 |
Date | January 2016 |
Creators | Nøland, Jonas Kristiansen |
Publisher | Uppsala universitet, Elektricitetslära, Uppsala : Institutionen för teknikvetenskaper |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Licentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | UURIE / Uppsala universitet, Institutitionen för teknikvetenskaper, 0349-8352 ; 347-16L |
Page generated in 0.003 seconds