Return to search

Studium vlivu elektrolytů na stabilitu a efektivitu diafragmového výboje / Study of electrolyte influence on diaphragm discharge stability and efficiency

This thesis is focused on so-called diaphragm discharge, which is one kind of electric discharges in liquid, which belongs among so-called AOP´s techniques, still more used for water cleaning in the present. One of effectiveness and stability indicators of diaphragm discharge is generation of hydrogen peroxide. In theoretical part, detail principle description of electric discharge in liquid is situated. Further, properties of electrolyte are introduced and general spectrophotometric method of obtained sample determination is described. In experimental part, a full procedure of experiment is introduced. Next part containing results and discussions introduces particular results of individual measurements and their reasons. Final chapter is the end, which forms total summary and evaluation of all results. By the application of all chosen electrolytes in solution at diaphragm discharge formation of hydrogen peroxide has appeared. Inorganic and organic electrolytes were used. As inorganic electrolytes following salts were selected – solutions of halogenides, next sodium nitrate as a representative of nitrates, potassium dihydrogenphosphate as a representative of phosphates, etc. Representative of organic electrolytes was citric acid. The value of initial conductivity of electrolytes had the main influence on hydrogen peroxide formation. Electrolytes potassium dihydrogenphosphate and sodium sulphate the great influence on effectiveness and stability of the diaphragm discharge. Their rate constants reached maximum value by the application of solution with initial conductivity of approximately 400 mikrosiemens, particularly 0.0492 mmol/l.min and 0.048 mmol/l.min. On the contrary, low values of rate constant were achieved in electrolyte ammonium chloride at around the same initial conductivity – 0.0269 mmol/l.min. During experiments stainless steel and platinum electrodes were used. It was found that kind of electrode material hadn’t influence on generation of hydrogen peroxide. Hydrogen peroxide was formed only in the cathode space.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216391
Date January 2008
CreatorsNěmcová, Lucie
ContributorsKrčma, František, Kozáková, Zdenka
PublisherVysoké učení technické v Brně. Fakulta chemická
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0016 seconds