This work is focused on study of electrical discharges in liquids, especially in water solutions. Generation of the discharge in water solutions leads to simultaneous effect of UV radiation, shock waves, electrical field and most importantly, chemically reactive species. This can be utilized in many applications such as sterilization, degradation of organic waste products, lithotripsy or other medical applications. The experimental part is concentrated on a diaphragm arrangement of the reaction system. This means that the reactor is divided into two electrode reservoirs connected only through a small orifice in a dielectric barrier. This barrier is made of Macor® non-porous ceramics with thickness of 1 mm, with the diameter of the orifice 0.6 mm, in the first part of work. In the second part, ShapalTM-M ceramics of thickness 1.0 mm and orifice diameter 0.6 mm was used. The experimental part is divided into two sections. For both, NaCl is chosen as an electrolyte to set the initial conductivity of the tested solutions to the value of 400 S/cm. Supplied direct voltage is regulated to attain power of 100 W in the system. In the first part, effect of addition of chosen alcohols (ethanol, isopropylalcohol and glycerol) on the efficiency of the discharge in their water solutions is studied. For this purpose, a special glass reactor was designed and constructed. The efficiency of the discharge is measured by a spectroscopic determination of concentration of complex formed by a titanium reagent and hydrogen peroxide, which is generated during the discharge. The results show no positive effect of addition of extra OH group to the reaction through the alcohols. The use of isopropylalcohol causes even a significant decrease in the amount of hydrogen peroxide generated. The subject of the second part is a comparison of effect of different electrode materials on the discharge. The efficiency is measured by the same method as in the first part. Materials chosen were stainless steel, platinum, aluminium, copper and carbon. Each material shows different hydrogen peroxide production rate under the same parameters. The most perspective material seems to be carbon, as an inert material, that can be expected not to initiate any decomposition of hydrogen peroxide. The least favourable appears to be copper. When used, no production of hydrogen peroxide was observed in one of the electrode parts of the reactor.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216930 |
| Date | January 2013 |
| Creators | Klímová, Edita |
| Contributors | Brablec, Antonín, Kozáková, Zdenka |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds