Return to search

A Review of Offshore Blowouts and Spills to Determine Desirable Capabilities of a Subsea Capping Stack

The events surrounding the Deepwater Horizon disaster have changed the face of deepwater operations. In order to continue drilling in the Gulf of Mexico, the regulatory body, the Bureau of Safety and Environmental Enforcement (BSEE), has required that applications to conduct work in the Gulf of Mexico (GOM) include a plan to stop, capture, or contain any uncontrolled release of fluids. The capping and containment systems built and implemented by BP during the event are an excellent starting point for minimizing pollution from deepwater subsea blowouts, but the system has limitations. The industry recognizes these limits but is currently focused on meeting the regulatory requirements.
This project will analyze events reported to the BSEE in the past 15 years to define the basis for potential capabilities that a capping and containment system should have to minimize the volume of fluid released as well as minimize the time needed to regain control of the well. The analysis will take a detailed look at 90 events over the past 15 years to determine critical factors in the design of a generally applicable capping stack. The research will also look at specific barriers that were used to regain control of the well. Finally, any factors which contributed to the severity of the event or contributed to the success of the blowout response are identified. Based on this detailed review, a list of design considerations for a generally applicable capping stack was created.

Identiferoai:union.ndltd.org:LSU/oai:etd.lsu.edu:etd-04232012-211924
Date25 April 2012
CreatorsSmith, Louise Matilde
ContributorsTyagi, Mayank, Bourgoyne, Darryl, Hughes, Richard G., Smith, John Rogers
PublisherLSU
Source SetsLouisiana State University
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lsu.edu/docs/available/etd-04232012-211924/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached herein a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to LSU or its agents the non-exclusive license to archive and make accessible, under the conditions specified below and in appropriate University policies, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.002 seconds