This thesis deals with computer modeling of temperature hysteresis during phase change, namely complete and partial phase change. There is performed a review of methods for modeling temperature hysteresis based on the enthalpy method and the effective heat capacity method. In the case of complete phase change, there are several methods that use the effective heat capacity method, as well as the heat source method, which, on the contrary, is a certain analogy of the enthalpy method. The following are works dealing with modelling of partial phase change, the most interesting of which is due to the validation method of static hysteresis and the method designed by Bony and Citherlet. The second part of this thesis deals with the hysteresis behavior of the material with phase change, which is organic paraffin RT 27. The input data obtained by differential scanning calorimetry was converted to the dependence of the enthalpy on temperature. These curves was represented by piecewise linear function. In the case of partial phase transformations, a modeling method based on the methods proposed by Bonym and Citherlet was designed. An one-dimensional model enabling thermal simulation of the material was implemented in the MATLAB software environment. The results obtained with this simulation are finally compared with a model that does not consider thermal hysteresis.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:445463 |
| Date | January 2021 |
| Creators | Petrášová, Anna |
| Contributors | Charvát, Pavel, Klimeš, Lubomír |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.3446 seconds