Semiconductor quantum dots are promising candidates as bright, indistinguishable, single-photon sources---making them desirable for applications in quantum computing and quantum cryptography protocols. By embedding the quantum dots in III-V nanowires, the collection efficiency from the quantum dot is greatly increased. Our goal is to develop a platform that allows for the stable and efficient generation of single-photons on chip. This on-chip design offers an enhanced degree of stability and miniaturization, important in many applications involving the processing of quantum information.
In this thesis, we demonstrate the efficient coupling of quantum light generated in a III-V photonic nanowire to a silicon-based photonic integrated circuit. We use high quality SiN waveguide devices fabricated by a foundry (LIGENTEC) to minimize coupling and propagation losses through the waveguide. A hybrid integration of these single-photon sources with a photonic integrated circuit is developed by employing a "pick & place" method which uses a nanomanipulator in a scanning electron microscope setup. By tailoring the nanowire geometry, we are able to maximize the efficient coupling between the optical mode of the photonic nanowire and an accompanying SiN waveguide through evanescent coupling.
To determine the effectiveness of our integration method, we compare our hybrid devices with free-standing nanowires on their growth substrate. For each set, we measured the optical properties (brightness, spectral purity, lifetime, and single-photon purity) and efficiencies of the devices.
We have shown that using tapered nanowires with embedded quantum dots coupled to on-chip photonic structures is a viable route for the fabrication of stable, high-efficiency, single-photon sources. Although the measured collection efficiencies from device to device were substantially different 9.6%~93%, we have found that the optical properties of the hybrid devices were hardly impacted from the transfer process. In fact, from the same nanowire that achieved 93% coupling efficiency, we were able to measure a single photon purity of 97%. By comparing the amount of emitted light collected from both ends of the nanowire (taper and base), we confirmed that the coupling efficiency of the devices have a strong dependence on the geometry of the nanowire as collection from the taper yielded count rates at least 10x greater than from the base.
From our promising results, we can envision integrating the nanowire devices with different types of photonic structures such as ring resonators.
| Identifer | oai:union.ndltd.org:uottawa.ca/oai:ruor.uottawa.ca:10393/42843 |
| Date | 25 October 2021 |
| Creators | Yeung, Edith |
| Contributors | Dalacu, Dan |
| Publisher | Université d'Ottawa / University of Ottawa |
| Source Sets | Université d’Ottawa |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
Page generated in 0.0019 seconds