Silicon (Si) and silicon nitride (Si3N4) have become the dominant photonic integrated circuit (PIC) material platforms, due to their low-cost, wafer-scale production of high-performance circuits. However, novel materials can offer additional functionalities that cannot be easily accessed in Si and Si3N4, such as light emission. Tellurium oxide (TeO2) is a novel material of interest because of its large linear and non-linear refractive indices, low material losses and large rare-earth dopant solubility, with applications including compact low-loss waveguides and on-chip light sources and amplifiers. This thesis investigates the post-processing integration of TeO2 devices onto standardized Si and Si3N4 chips to incorporate TeO2 material advantages into high-performance PICs. Chapter 1 introduces the state-of-the-art functionality for various integrated photonic materials as well as methods for integrating multiple materials onto single chips. Chapter 2 presents the development of a high-quality TeO2 thin film fabrication process by reactive RF sputtering, with material refractive indices of 2.07 and optical propagation losses of <0.1 dB/cm at 1550 nm. Chapter 3 investigates a conformally coated TeO2-Si3N4 waveguide platform capable of large TeO2 optical confinement and tight bending radii, characterizing fiber-chip edge couplers down to ~5 dB/facet, waveguide propagation losses of <0.5 dB/cm, directional couplers with 100% cross-over ratio, and microresonators with internal Q factors of 7.3 × 105. In Chapter 4 a spectroscopic study of TeO2:Er3+-coated Si3N4 waveguide amplifiers was undertaken, with internal net gains of up to 1.4 dB/cm in a 2.2-cm-long waveguide and 5 dB total in a 6.7-cm-long sample demonstrated, predicted to reach >10 dB could 150 mW of pump power be launched based on a developed rate-equation model. Chapter 5 demonstrates TeO2-coated microtrench resonators coupled to silicon waveguides, with internal Q factors of up to 2.1×105 and investigates environmental sensing metrics of devices. Chapter 6 summarizes the thesis and provides avenues for future work. / Thesis / Doctor of Philosophy (PhD)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/26867 |
| Date | January 2021 |
| Creators | Frankis, Henry C. |
| Contributors | Bradley, Jonathan D. B., Engineering Physics |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0013 seconds