The Kerr rotation and Kerr ellipticity of thin films can be measured using an AC magneto-optic Kerr effect (AC-MOKE) system. The longitudinal MOKE measurements were taken for a series of Co2MnSixAl1-x thin films with values of x= 0.00, 0.25, 0.50, 0.75, 1.00. The films were fabricated using ultra high vacuum, pulsed laser deposition (PLD) techniques. The PLD targets were made using conventional arc-melting techniques. Using a Jones matrix analysis, it was shown that the Kerr rotation and Kerr ellipticity can be measured separately using two optical setups by taking advantage of a photoelastic modulator and lock-in techniques.
Co2MnAl and Co2MnSi are both in a class of materials known as Heusler alloys and are predicted to have a high degree of spin polarization. The crystal structure was confirmed as the L21 using powder x-ray diffraction. The lattice constants were shown to be 5.61Å and 5.77 Å for Co2MnSi andCo2MnAl, respectively. For each film, the DC-MOKE, AC-Kerr rotation, and AC- Kerr ellipticity were measured. The DC-MOKE loops were used to estimate the total Kerr rotation. There was no noticeable trend in the values of the total Kerr rotation as calculated using a technique based on Malus law. The Kerr rotation showed a decreasing trend with concentration (x). The sample with x=0.50 was calculated to be the same as the one with x=0.00 value. The Kerr ellipticity also decreased as x was increased. There have been no reports in the literature on direct measurements of the Kerr rotation or ellipticity for Co2MnSixAl1-x for any values of x. The measurements gave values that were comparable to reported calculations and measured values of similar Heusler alloys.
| Identifer | oai:union.ndltd.org:LSU/oai:etd.lsu.edu:etd-01222013-162013 |
| Date | 24 January 2013 |
| Creators | Champagne, Matthew Stephen |
| Contributors | Sheehy, Daniel, Young, David, Stadler, Shane |
| Publisher | LSU |
| Source Sets | Louisiana State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lsu.edu/docs/available/etd-01222013-162013/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached herein a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to LSU or its agents the non-exclusive license to archive and make accessible, under the conditions specified below and in appropriate University policies, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0019 seconds