Thesis (MScFor)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: Information on the external shape and internal properties of a tree such as the branch
structure, tree ring widths and formation, and defects such as resin pockets is important for
many forest –and wood science researchers as well as for the forest and wood processing
industries. Resin pockets are internal defects associated with some softwood species, and are
undesirable in some wood applications such as furniture and veneer. A tool that is often used in
research to obtain this information is the Computed Tomography scanner. The high cost of the
scanner, as well as the cost of transporting logs to the scanner, limits the application range of
this equipment. An alternative, lower cost method would be beneficial for many researchers
interested in tree shape and macroscopic internal tree characteristics. The objectives of this
study were to:
- Design, construct and test a mobile system that can be used in field to obtain a
three‐dimensional model of a log or tree stem indicating selected macroscopic
internal characteristics and,
- Interpret results to explain the occurrence and causes of resin pockets in Pinus
patula from the Mpumalanga escarpment, South Africa.
A system for dissecting and measuring trees in field was designed, constructed and tested. The
metal frame was used to cut a stationary, fixed log into discs and obtain digital images of crosssections
along the stem axis. The frame was capable of processing logs with maximum
dimensions of 3 m in length and 45 cm in diameter. Software was developed to convert the
digital images into three‐dimensional models of logs and trees to demonstrate properties such
as the external shape of the trees, branch structure and pith location. Properties such as ring
width were measured from the images obtained.
The study was conducted in the Mpumalanga escarpment to obtain three‐dimensional models
of Pinus patula trees and to establish the reason for formation of resin pockets in these trees. Four 3 m logs from twenty‐four trees from three compartments were dissected and digitally
reconstructed into three‐dimensional models.
A total of 61 cross sections with resin pockets were identified from the 2750 cross cut images
taken 20 cm apart along the longitudinal axis of the log. It was not possible to accept or reject
conclusively any of the existing hypotheses for the cause of resin pocket formation. The
formation of Type 2 resin pockets was most probably due to felling damage during thinning
operations. It seems likely that wind damage and possibly insects might be responsible for the
formation of Type 1 resin pockets. / AFRIKAANSE OPSOMMING: Kennis in verband met die interne eienskappe van ‘n boom soos takeienskappe, jaarringwydte
en vorm, en harsholtes is belangrik vir sommige bos ‐en houtkundige navorsers. Die toerusting
wat huidiglik algemeen gebruik word om inligting van hierdie aard te bekom is ‘n CT skandeerder.
Die metode is egter duur as gevolg van hoë kapitale koste van die toerusting
sowel as die vervoerkoste van stompe na die CT‐fasiliteit. ‘n Meer ekonomiese alternatief sal vir
baie navorsers van waarde wees. Harsholtes in hout lei tot afgradering van hout en fineer.
Die doel van die studie was twee‐sydig:
- Om ‘n stelsel te ontwerp en bou wat ‘n drie‐dimensionele model van ‘n boom kan
skep wat sommige makroskopiese, interne eienskappe weergee, en
- Om die voorkoms en oorsaak van harsholtes in Pinus Patula van die Mpumalanga
platorand te ondersoek.
‘n Raam is ontwerp en vervaardig wat in die plantasie gebruik word. Die raam kan stompe van
tot drie meter lengte met ‘n maksimale diameter van 45 cm hanteer. Die raam is gebruik om
snitte deur die stompe te maak, ‘n afstandmeting tot by die gesaagde oppervlak word deur ‘n
lasermeter geneem en ‘n kamera neem ‘n foto. Sagteware word dan gebruik vir die uitkenning
van sekere dele in elke beeld sowel as die samestelling van ‘n drie‐dimensionele model.
Data‐insameling met die raam is in Mpumalanga gedoen. Die raam is in die tydperk getoets en
het goed gefunksioneer. Vier stompe elk vanaf vier‐en‐twintig bome vanuit drie afsonderlike
kompartemente is verwerk op die raam en volledige drie‐dimensionele modelle geskep vir
hierdie bome insluitend hul eksterne vorm, takeienskappe en pitvorm (“pith location”). Ongeveer 2750 foto’s van dwarssnitte is tydens data‐insameling geneem. Net 61 van die foto’s
het harsholtes bevat. Geen definitiewe oorsaak van harsholtes kon bepaal word nie. Tipe 2
harsholtes word waarskynlik as gevolg van skade tydens uitdunning van bome gevorm. Wind en
insekte lyk na die mees waarskynlike oorsake van Tipe 1 harsholtes.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/80082 |
| Date | 03 1900 |
| Creators | Lerm, Frederik Johannes |
| Contributors | Wessels, C. B., Seifert, T., Stellenbosch University. Faculty of AgriSciences. Dept. of Forest and Wood Science. |
| Publisher | Stellenbosch : Stellenbosch University |
| Source Sets | South African National ETD Portal |
| Language | en_ZA |
| Detected Language | English |
| Type | Thesis |
| Format | 116 p. : ill. |
| Rights | Stellenbosch University |
Page generated in 0.0018 seconds