The master thesis deals with the design of a condensing steam turbine for a waste incineration plant with regulated take for a heat exchanger, which has a heat output of 15 MWt and a temperature gradient of 60/90 °C. In the thesis, a thermal scheme was first designed, which was based on the required design parameters. The maximum mass flow of steam into the turbine is 38 t/h. The pressure and temperature of the admission steam is 37 bar and 440 °C. The degassing temperature is 105 °C and the cooling water temperature at the condenser inlet is 20 °C. The following is the design and thermodynamic calculation of the turbine flow channels. The first stage of the turbine is designed as a regulatory with equal pressure blades. The rest part of the turbine is designed with overpressure blades and is divided into 6 cones, in which there are a total of 27 stages. The strength inspection of the designed blade profiles was performed. A compensating piston and a gland system were designed. Finally, bearings for the rotor were designed and then the operating diagram of the turbine was constructed. The work is supplemented by a structural drawing of the longitudinal section of the turbine.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417528 |
| Date | January 2020 |
| Creators | Janata, Petr |
| Contributors | Fiedler, Jan, Kracík, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds