This Master thesis aims to increase the effectivity of the machining of pneumatic cylinders specific components. In the first chapter, the concurrent approach to the manufacture of corrosion resistant austenitic piston rod. This approach consists of the technological procedure, the analysis of the cutting tools used in the process and the cutting conditions. The machining process deals with low durability of cutting tools and the necessity of continual supervision by the operator. Therefore, an alternate design of cutting tools and cutting conditions is suggested in the next chapter. The new design has been tested in manufacture process. In the last chapter, the concurrent and the innovative approach are compared. By choosing the proper cutting tools and cutting conditions it was managed to increase the durability of cutting tools and to increase the effectivity of the whole manufacture process.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:402539 |
Date | January 2019 |
Creators | Židlický, Ondřej |
Contributors | Chladil, Josef, Sedlák, Josef |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0067 seconds