Dissolved and Colloidal substances (DisCo) and metals are released from wood during thermomechanical pulp (TMP) production. The mechanical treatment causes that these components have a tendency to accumulate in process waters, as the water circulation systems in integrated paper mills are being closed. Disturbances such as pitch depositions on the paper machine (pitch problems), specks in the paper, decreased wet and dry strength, interference with cationic process chemicals, and impaired sheet brightness and friction properties appear in the presence of DisCo substances. The presence of transition metal ions such as manganese results in higher consumption of bleaching chemicals (hydrogen peroxide) and lowers the optical quality of the final product, and addition of complexing agents, such as EDTA or DTPA, to prevent this is needed. The never ending trends to decrease water consumption and increase process efficiency in pulp and paper production stress that it is very important both to know the effects of wood substances on pulping and papermaking and to be able to remove them in an efficient way. Carried out investigations presented in this thesis show that the lipophilic extractives can be removed from TMP press water to high extent. A 90% decrease in turbidity and a 91% removal of lipophilic extractives from TMP press water can be obtained by addition of a cationic surfactant as foaming agent during flotation. Additionally, fibres located in TMP press water are not removed with the foam fraction but purified. A retained concentration of hydrophilic extractives in the process water indicates that the flotation is selective. Moreover, by introduction of a new recoverable surface active complexing agent, a chelating surfactant, manganese ions in the form of chelates can be successfully removed from the pulp fibres and separated from the process water in the same flotation process. iii The findings presented above indicate new possibilities for internal water cleaning and decreased emissions to water if flotation technology is applied in an integrated mechanical pulp mill. / ReGain/FORE
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:miun-16088 |
| Date | January 2012 |
| Creators | Zasadowski, Dariusz |
| Publisher | Mittuniversitetet, Institutionen för tillämpad naturvetenskap och design, Sundsvall : Mittuniversitet |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Licentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Mid Sweden University licentiate thesis, 1652-8948 ; 74 |
Page generated in 0.002 seconds