Return to search

Surface immobilization of plant cells

A novel technique was developed to immobilize plant cells. The cells are deposited on a surface of man-made fibrous material which provides for strong binding of the plant tissue biomass growing in the submerged culture. It was shown that the plant cells need to be fully viable for the attachment process to occur. / The scale-up of this technique to laboratory size specifically designed bioreactors was performed successfully. The cell immobilizing matrix was formed into a vertical spirally wound configuration to provide for a high immobilizing area-to-volume ratio (0.8-1.2 cm$ sp{-1}$). A modified airlift (riser-to-downcomer area ratio of 0.03 and vessel height-to-diameter (H/D ratio of 3) and a low H/D ($ sim$1.5) mechanically stirred vessel delivered the optimum bioreactor performance characterized by low foaming of the broth and highly efficient plant cell attachment and retention ($ geq$96%). / The growth of Catharantus roseus plant cells was investigated in these bioreactors. This process was found not to be mass transfer limited above minimal mild mixing and aeration levels ensuring sufficient supply of nutrients, especially oxygen (k$ sb{ rm L}$a $ sim$ 10-15 h$ sp{-1}$) to the immobilized biomass. / The gentle surface immobilization technique developed in this work did not hinder the biosynthesis potential of the SIPC. In fact, it appeared to induce a partial secretion of some valuable compounds into the culture medium. The mildness, easiness, efficiency, mass transfer characteristics, scale-up potential and biomass loading capacity (11-13 g d.w./L) of the surface immobilization technique make it superior to all other immobilization techniques used to culture plant cells. In addition, its bioreactor overall biomass concentration compares favourably to suspended plant cell concentrations attainable in bioreactors (15-20 g d.w./L).

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.28397
Date January 1987
CreatorsArchambault, Jean
PublisherMcGill University
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Formatapplication/pdf
CoverageDoctor of Philosophy (Department of Chemical Engineering.)
RightsAll items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated.
Relationalephsysno: 000660197, proquestno: NL46149, Theses scanned by UMI/ProQuest.

Page generated in 0.0023 seconds