The presented thesis was created in cooperation with Siemens, s.r.o. and deals with the analysis of the bending of aluminium sheets. These products are used as conductors of electrical energy. The problem happened when the bending angle was 90 ° when there was a violation outside of the bend. The aim of the thesis is to verify whether the bend is correctly designed using analytical and empirical relations and the finite element method. Because of the requirement for running numerical simulation on one of the freely available software the Salome Meca program environment was used. The results of numerical simulation did not confirm that the violation should occur. In deeper analysis appeared doubts whether it is possible to correctly evaluated result only by data from tensile test. In the final part, there are recommended some experiments which would be necessary for the correct calibration of the ductil fracture criteria.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318795 |
Date | January 2017 |
Creators | Kalivoda, Ondřej |
Contributors | Šebek, František, Vosynek, Petr |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0009 seconds