Alkali-activated materials (AAM) are construction materials with great potential, especially for their environmental friendliness, but also due to their mechanical properties. Therefore, it is appropriate to pay further attention to these binders. This diploma thesis deals with monitoring the effectiveness of plasticizers in connection with the surface chemistry of the alkali-activated slag system. Sodium hydroxide and sodium water glass were used as alkaline activators for the preparation of alkali-activated blast furnace slag-based systems. To study the effectiveness of the lignosulfonate plasticizer, yield stress, heat flow, adsorption and zeta potential were monitored depending on the amount and time that the plasticizer was added to the system. The results show that the type of activator used in the mixtures plays an important role. NaOH-activated samples revealed the best efficiency of lignosulfonate plasticizers. A key factor in studying the behavior of the studied mixtures was the measurement of the zeta potential, which provided insight into the surface charge of blast furnace slag particles related to the ability of lignosulfonate to adsorb on grains of alkali-activated slag.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:444210 |
| Date | January 2021 |
| Creators | Flídrová, Michaela |
| Contributors | Šoukal, František, Kalina, Lukáš |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds