Master's thesis, elaborated within Master's degree, submits a proposal of suitable technology for manufacturing “column foot“ part, which attaches filtration unit to the ground. Material is 6 mm thick sheet steel in accordance with ČSN 41 1375 norm. Run (/production batch) of the part is 4 000 pieces per year. On the basis of literary study about unconventional technologies for flat sheet metal production 3 technologies were suggested: plasma cutting, water jet cutting and laser cutting. These technologies were technologically and economically analyzed. At the end thesis evaluates whether purchase of respective machine would pay out for the firm or they should continue to buy parts from cooperation company.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231059 |
Date | January 2014 |
Creators | Langr, Aleš |
Contributors | Šlais, Miroslav, Peterková, Eva |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds