MIKYSKA Josef: The manufacture of hold-down arm by technology of fine blanking process. The diploma thesis deals with innovative technology of „hold-down arm“ by fine blanking technology. The component is made of steel plate no. 12 041.20, 3mm thick. The theoretical part presents possible solutions. In the project there are compared versions of fine blanking technology. Regarding the required size accuracy, surface quality and assumed series production of 600 000 pieces per year the fine blanking technology using V-ring was proposed as the innovative technology. On the basis of technological calculations the triple action hydraulic press GKP-F 100 (produced by Feintool) and a blanking tool were determined. The blanking tool solution is accomplished including calculations and futher documentation. Then, the project implies technical and economical evaluation of the present technology ( conventional blanking with consequentional cutting) and of the newly designed technology. According to the analysis using the newly designed production technology economic and time savings are achieved.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228320 |
Date | January 2008 |
Creators | Mikyska, Josef |
Contributors | Žák, Ladislav, Peterková, Eva |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0092 seconds