The project developed in within the framework of Magister ´s studies of field M-STM is elaborated to meet customer requirements for manufacture of transformer station, which is intended for use in photovoltaic power station. Design and drawing documentation were prepared using 3D CAD System Solid Edge. Self-supporting frame of the transformer station welded from separate parts made from alu/zinc plates is in the form of a technological unit, which is equiped with electrical technology needed for safe and failure-free operation of the power station. It deals with technology of components production, including subsequent process of hard soldering and surface finishing. As the best solution was chosen processing of forming punching and using brake press. Chosen production methods are assessed not only form point of view of used technology, including the technical pitfalls associated with processing of alu/zinc plates, but also in terms of economic costs of manufacture throughout the transformer station. The forming processes are made using punching press TRUMPF TC200R, with rated shear force of 165 kN and brake press URSVIKEN Optiflex with rated compressive force 1 300 kN. Forming tools are optimally selected according to parameters of different types of parts. Finally, it compares the technical-economic aspects of production transformer station made of alu/zinc plates compared with whole-concrete construction of the station using bell-casting method.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229683 |
| Date | January 2011 |
| Creators | Sykáček, Jiří |
| Contributors | Šlais, Miroslav, Císařová, Michaela |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0086 seconds