The thesis deals with the optimization of process parameters in the oxidative laser cutting of structural 20 mm thick steel with regard to the type of material, the resulting roughness of the cut and the resulting price of the product. In line with the literary study and the Taguchi method, an experiment was developed. The cutting speed, laser performance, cutting gas pressure, and focal position were controlled during the experiment. Sample sets were cut with 7.5" and 10" focusing lens from the TATA STEEL S355MC and SSAB LASER 355 MC steels. According to ČSN EN ISO 9013, the samples were evaluated for roughness. Then micro and macro structures were evaluated, and compare the hardness according to Vickers. In conclusion, technical and economic evaluation was determined.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:317197 |
Date | January 2017 |
Creators | Šoukal, Hynek |
Contributors | Hála, Michal, Mrňa, Libor |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds