The first part of the diploma thesis is focused on the analysis and evaluation of the current production of sipes by two SLM devices PXL and M2 Cusing, produced by Phenix Systems and Concept Laser companies. The samples of both machines went through the same manufacturing process and the same process of measurement and evaluation, in order to carry out comparison between individual machines. Geometric accuracy, surface roughness, mechanical properties, and material structure of the samples have been compared. For the sipes it was necessary to create a digital evaluation methodology of geometry. In the second part of the thesis, process parameters are selected on the basis of research and further their influence on surface roughness of manufactured sipes is analyzed.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:241858 |
| Date | January 2016 |
| Creators | Tomeš, Jan |
| Contributors | Rapant, Martin, Koutný, Daniel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds