This diploma thesis deals with the influence of long fiber optic paths on the polarization state of light and their use for powering polarization sensors. The aim of the diploma thesis was to design the arrangement of optical fiber components so that the polarization properties of light at the end of the path are further usable for sensory purposes. Four partial measurements with a long path (in a laboratory setting, laying in the ground, on a curtain, under the influence of external influence) and one measurement without a path under the influence of external influence were designed. The overall measurement results demonstrate that for the functional power supply of long-distance sensor systems, an existing single-mode fiber can be used (laid by laying in the ground), into which a light source for a given sensor system would be multiplexed. In the discussion, all types of measurements are analyzed and compared with each other. Finally, the overall result is summarized and applications are described in which such a sensor system could be used.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442367 |
Date | January 2021 |
Creators | Panascí, Marco |
Contributors | Grenar, David, Filka, Miloslav |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds