<p>Nowadays, the polishing process is one of the most important steps of the manufacturing of moulds and dies. Occupying up to 40% of the total production time and cost, it is decisive for the final appearance and quality of a surface. Because of its complexity, the polishing is mainly carried out manually; and the final quality depends of the expertise of the operator. That is why an automation of the polishing process is necessary.</p><p>The purpose of this project was to find out the optimized sequence of polishing for a Mirrax ESR steel (Uddeholm Tooling AB) using the Strecon RAP-200 (robot assisted polishing equipment). Using a Design of Experiment, the machine parameters were tested in order to better understand their influences and interactions. The report starts with a description of general polishing knowledge and ends up with the results from a Design of Experiment.</p><p>The information from this test are a first step in the evaluation of the Strecon RAP-200. Even if many results have been found out, only four parameters have been tested, and to be able to optimize the polishing sequence, further studies need to be carried out.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:hh-2683 |
| Date | January 2009 |
| Creators | Faure-Vidal, Anaïs |
| Publisher | Halmstad University, School of Business and Engineering (SET), Högskolan i Halmstad/Sektionen för Ekonomi och Teknik (SET) |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
Page generated in 0.002 seconds