Polyamideamine epichlorohydrin (PAE) resin is a water soluble additive and the most used permanent wet strength additive in alkaline conditions for preparing wet strengthened papers. In this thesis, we studied some properties of PAE resins and wet strengthened papers prepared from them. In order to elucidate PAE structure, liquid state, 1H and 13C NMR was performed and permitted signals assignment of PAE structure. PAE films were prepared to study cross-linking reactions and then thermal and ageing treatments were performed. According to our results, the main PAE cross-linking reaction occurs by a nucleophilic attack of N atoms in the PAE and/or polyamideamine structures forming 2-propanol bridges between PAE macromolecules. A secondary contribution of ester linkages to the PAE cross-linking was also observed. However, this reaction, which is thermally induced, only occurs under anhydrous conditions. The mechanism related to wet strength development of PAE-based papers was studied by using CMC as a model compound for cellulosic fibres and PAE-CMC interactions as a model for PAE-fibres interactions. Based on results from NMR and FTIR, we clearly showed that PAE react with CMC that is when carboxylic groups are present in great amounts. Consequently, as the number of carboxylic groups present in lignocellulosic fibres is considerably less important and the resulting formed ester bonds are hydrolysable, we postulate that ester bond formation has a negligible impact on the wet strength of PAE-based papers. In the second part of this work, a 100% Eucalyptus pulp suspension was used to prepare PAE-based papers. PAE was added at different dosages (0.4, 0.6 and 1%) into the pulp suspension and its adsorption was indirectly followed by measuring the zeta potential. Results indicate that the adsorption, reconformation and/or penetration phenomena reach an apparent equilibrium between 10 and 30 min. Moreover, we showed that the paper dry strength was not significantly affected by the conductivity level (from 100 to 3000 µS/cm) of the pulp suspension. However, the conductivity has an impact on the wet strength and this effect seems to be enhanced for the highest PAE dosage (1%). We also demonstrated that storing the treated paper under controlled conditions or boosting the PAE cross-linking with a thermal post-treatment does not necessarily lead to the same wet strength. Degrading studies of cross-linked PAE films showed that PAE degradation in a persulfate solution at alkaline medium was more effective. A preliminary study of industrial PAE-based papers (coated and uncoated papers) was also performed. For uncoated paper, persulfate treatment was the most efficient. For coated papers, all treatments were inefficient in the used conditions, although a decrease of the wet tensile force of degraded samples was observed. The main responsible of the decrease of persulfate efficiency for coated papers was probably related to side reactions of free radicals with the coating constituents.
| Identifer | oai:union.ndltd.org:CCSD/oai:tel.archives-ouvertes.fr:tel-00952991 |
| Date | 05 June 2012 |
| Creators | Siqueira, Eder jose |
| Publisher | Université de Grenoble |
| Source Sets | CCSD theses-EN-ligne, France |
| Language | English |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0091 seconds