<p>IKIZ, YUKSEL. Fiber Length Measurement by Image Processing. (Under the direction of Dr. Jon P. Rust.) This research studied the accuracy and feasibility of cotton fiber length measurement by image processing as an alternative to existing systems. Current systems have some weaknesses especially in Short Fiber Content (SFC) determination, which is becoming an important length parameter in industry. Seventy-two treatments of five factors were analyzed for length and time measurements by our own computer program. The factors are: Sample preparation (without fiber crossover and with fiber crossover), lighting (backlighting and frontlighting), resolution (37-micron, 57-micron, 106-micron, and 185-micron), preprocessing (4-neighborhood and 8-neighborhood), and processing (outlining, thinning, and adding broken skeletons). The best results in terms of accuracy, precision and analysis time for images without fiber crossovers were: 106-micron resolution with frontlighting using an 8-neighborhood thresholding algorithm and using an outline algorithm for length determination. With fiber crossovers, 57-micron resolution with backlighting using an 8-neighborhood thresholding algorithm and using a thinning algorithm combined with an adding algorithm for combining broken skeletons. Using the above conditions, 1775 area can be analyzed using our current equipment in 15 seconds. In the case of images with crossovers, only 117 can be analyzed in 15 seconds. This research demonstrates that successful sample preparation without fiber crossovers would create the best fiber length measurement technique, however with fiber crossovers the system efficiency has been proven as well.<P>
| Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-20000809-225316 |
| Date | 10 August 2000 |
| Creators | Ikiz, Yuksel |
| Contributors | Jon P. Rust, H. Joel Trussell, Robert A. Barnhardt, Warren J. Jasper |
| Publisher | NCSU |
| Source Sets | North Carolina State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://www.lib.ncsu.edu/theses/available/etd-20000809-225316 |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0011 seconds