The synthesis of highly porous organic polymers with predefined porosity has attracted considerable attention due to their potential in a wide range of applications. Porous organic polymers (POPs) offer novel properties such as permanent porosity, adjustable chemical nature, and noteworthy thermal and chemical stability. These remarkable properties of the POPs make them promising candidates for use in gas separation and storage. The emission of carbon dioxide (CO2) from fossil fuel combustion is a major cause of global warming. Finding an efficient separation and/or storage material is essential for creating a cleaner environment. Therefore, the importance of the POPs in the field is undeniable. Along these pursuits, several porous polymers have been synthesized with different specifications. The first class of porous polymers are called Covalent Organic Frameworks (COFs). They possess highly ordered structures with very high surface areas and contain light elements. COFs based on B-O, C-N, and B-N bonds have been reported so far. In particular, COFs based on B-O bond formation are well investigated due to the kinetically labile nature of this bond which is essential for overcoming the crystallization problem of covalent networks. Along this line, triptycene-derived covalent organic framework (TDCOF-5) has been synthesized through a condensation reaction between 1, 4-benzenediboronic acid and hexahydroxytriptycene which leads to the formation of boronate ester linkage. TDCOF-5 has the highest H2 uptake under 1 atm at 77K (1.6%) among all known 2D and 3D COFs derived from B–O bond formation and moderate CO2 uptake (2.1 mmol g-1) with Qst values of 6.6 kJ mol-1 and 21.8 kJ mol-1, respectively.
The second class of porous structures discussed herein is diazaborole linked polymers (DBLPs). They are constructed based on B-N bond formation and possess amorphous structures due to the lack of the reversible bond formation processes. At this scope, 2, 3, 6, 7, 14, 15-hexaaminotriptycene (HATT) hexahydrocloride was synthesized and reacted with different boronic acid derivatives to produce three different porous polymers under condensation reaction conditions. DBLP-3, -4 and -5 have very high surface areas; 730, 904, and 986 m2 g-1, and offer high CO2 uptake (158.5, 198, and 171.5 mg g-1) at 1 bar and 273 K, respectively. DBLPs have much higher CO2 uptake capacity when compared to almost all reported B-N and B-O containing porous polymers in the field. In addition to high CO2 capacity, DBLPs showed remarkable CO2/N2 and CO2/CH4 selectivity, when the Henry`s law of initial slope selectivity calculations were applied. In general, DBILPs exhibit high selectivities for CO2/N2 (35-51) and CO2/CH4 (5-6) at 298 K which are comparable to those of most porous polymers.
Identifer | oai:union.ndltd.org:vcu.edu/oai:scholarscompass.vcu.edu:etd-4958 |
Date | 01 January 2015 |
Creators | Kahveci, Zafer |
Publisher | VCU Scholars Compass |
Source Sets | Virginia Commonwealth University |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | Theses and Dissertations |
Rights | © The Author |
Page generated in 0.0019 seconds