In 2015 the global fibre consumption was 96.7 million tonnes, which is an increase of 3.1% from the year before. Our high textile consumption has led to an increasing demand of raw materials and generation of textile waste. Only in Europe, a total amount of 4.3 million tonnes of apparel waste each year is sent to either incineration or landfills. Approximately 50% of the clothes we discard and donate are composed of cotton. In the future, the cotton production is predicted to stagnate since the world population is increasing and arable land to greater extent will be needed for food production. Thereby, it is important that we utilize the cotton waste generated. One of the most commonly used processes for recycling textile waste is the shredding process. In this method, textile waste is shredded back into their constituent fibres. The drawback with the shredding process is that the fibre length is reduced. The fibre length is an important property since it has a high influence on textile processing such as yarn production and final product quality. The aim of this thesis was to investigate how post-consumer cotton garments with different degree of wear affects the fibre length obtained in the shredding process. This was performed by analysing the input fibre length as well as the output fibre length. Additionally, several parameters were investigated: fabric construction and yarn structure. Degree of wear was categorized into two levels: low and high degree of wear. The fabric constructions used in this study were single-jersey and denim. The yarn structure were analysed in terms of yarn count, yarn twist and manufacturing process. The result showed that the fibre length before shredding was statistically significant longer for the materials with low degree of wear compared to high degree of wear. After shredding, it was shown that the fibre length reduction was lower for the materials with high degree of wear. This indicates that longer fibres give higher fibre length reduction. In addition, it was found that finer yarn gives higher fibre length reduction. The result also showed that the yarn manufacturing process has a great influence on the ease of shredding and the fibre length obtained in the end. Based on the result in this thesis it can be concluded that the shredding process needs to be improved in order to preserve the fibre length. The area of post-consumer textile waste is complex and the result showed that there is many underlying parameters that need to be taken into account to further develop the shredding process.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hb-12380 |
| Date | January 2017 |
| Creators | Aronsson, Julia |
| Publisher | Högskolan i Borås, Akademin för textil, teknik och ekonomi |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0017 seconds