This diploma thesis deals with the processing of the magnesium-based powder materials with the addition of zinc by the spark plasma sintering. The aim of this thesis is to evaluate influence of sintering parameters and zinc content on the microstructure and mechanical properties of the material. First part of the thesis is literary research which is divided into two main chapters. The first chapter describes magnesium-based materials and mentions their use as biomaterials. The second chapter discusses powder metallurgy, specifically magnesium powders and spark plasma sintering. In the experimental part the powders were sintered at temperatures 300 °C and 400 °C and an analysis was performed using optical microscope, scanning electron microscope, then also EDS analysis and hardness, microhardness and three-point bending tests were performed. An increase in hardness was observed with increasing zinc content and with increasing sintering temperature. The flexural strength was higher for materials sintered at a temperature of 400 ° C.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442747 |
Date | January 2021 |
Creators | Pleskalová, Kateřina |
Contributors | Hutařová, Simona, Doležal, Pavel |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds