Return to search

Design and Optimization of Power MOSFET Output Stage for High-frequency Integrated DC-DC Converters

Switching device power losses place critical limits on the design and performance of high-frequency integrated DC-DC converters. Especially, the layout of metal interconnects in lateral power MOSFETs has a profound effect on their on-resistances and conduction power losses. This thesis presents an analytical interconnect modeling and layout optimization technique for large-area power MOSFETs. The layout optimization of 24V LDMOS transistors in the area of 1 mm2 has achieved an improvement of 55 % in its on-resistance. The simulation result has been verified by experimental measurements on a test chip fabricated in TSMC 0.25 µm HV CMOS technology. In addition, this thesis presents an optimized output stage design methodology for the implementation of a 4 MHz, 12V to 1V integrated DC-DC converter. A segmented output stage scheme is employed to increase the converter efficiency at light load conditions. The peak efficiency of 84% was achieved at load current of 2 A.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/65440
Date18 June 2014
CreatorsLee, Junmin
ContributorsNg, Wai Tung
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
Languageen_ca
Detected LanguageEnglish
TypeThesis

Page generated in 0.0016 seconds