This master thesis deals with design of DC-DC converter for onboard charging of electric vehicle. Developed converter will mainly be used for charging stationary traction battery in laboratory. Output voltage of this charger will be adjustable by user in between 200 V and 450 V depending on the current charged battery configuration. Output current limit is set at 8 A. Since the converter will be supplied from standard household socket, the problem of power factor correction must be solved during the design. That is because a large part of this thesis is focused on describing the problematics of power factor correction. After that, active PFC module is designed, completed and performance of this module is verified. To achieve low overall losses and thus be able to keep small volume of the system, modern switching components based on Silicon Carbide were preferred. Beside laboratory use, completed system will be used to emphasize volumetric difference between onboard chargers based on old versus modern switching components.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:401968 |
| Date | January 2019 |
| Creators | Holub, Miroslav |
| Contributors | Červinka, Dalibor, Folprecht, Martin |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds