This thesis deals with the problem of the high-speed induction machines. In the introduction the design of the machines and problem areas are discussed. The feeding from the frequency converter and the mechanical strength of the rotor appear to be the biggest problem. High-speed engines with solid rotors were designed. The first model is equipped with a conductive cooper layer on the surface. This model is exposed to harmonic and non-harmonic input voltage and then the results of the simulations are compared. The following model of the thesis is equipped with axial slots. In the practical part of the thesis no load measurement is taken. One point was measured at nominal frequency. At the end of the thesis the results of the measurements are compared with the results of the figures extracted from Maxwell software.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:220922 |
Date | January 2014 |
Creators | Klíma, Jiří |
Contributors | Ondrůšek, Čestmír, Vítek, Ondřej |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds