Return to search

Notch Filter Design for Power Line Interference Artifact Reduction of ECG Signal and Feature Extraction in LabVIEW

Electrocardiogram (ECG) is a biological signal that represents the heart's electrical activity. Interference from power lines introduces a frequency component of 50 to 60 Hz into the signal, which is the principal cause of ECG corruption. By using the Cadence Virtuoso Spectre circuit simulator and typical TSMC RF 180 nm CMOS technology, a notch filter was created to reduce powerline interference. The advantage of utilizing a notch filter for PLI is that noise at 60 Hz is completely eliminated without sacrificing any important information. Additionally, this study contains a MATLAB-based model for, which is used to compute the power spectral density for the obtained time-domain signal. By incorporating power spectral density into data gathering procedures, it is feasible to enhance data collection methodologies, construct models that appropriately account for observed power and aid in the removal of undesired components.
NI LabVIEW is used to extract features. The advantage of ECG feature extraction is that it provides information that assists in the identification of cardiac rhythm issues, and gives information about the occurrence of heart attack. In this study, several patient data sets are utilized to extract characteristics and provide information regarding heart condition abnormalities.

Identiferoai:union.ndltd.org:unt.edu/info:ark/67531/metadc1944225
Date05 1900
CreatorsKasidi, Divyasri
ContributorsMahbub, Ifana, Namuduri, Kamesh, Sun, Hua
PublisherUniversity of North Texas
Source SetsUniversity of North Texas
LanguageEnglish
Detected LanguageEnglish
TypeThesis or Dissertation
FormatText
RightsPublic, Kasidi, Divyasri, Copyright, Copyright is held by the author, unless otherwise noted. All rights Reserved.

Page generated in 0.0019 seconds