The main objective of this work is to create a program for automatic operation of measuring test track. The track is used for multi-hole velocity probes calibration. Normalized orifice plate is used as measurement standard. The program requires the user to enter certain information, which are not measured directly e.g. the values of measuring resistors, static air pressure. After entering this information, measurement can be started. The measurements are carried out simultaneously on the both flowmeters and on the thermomether Pt 100. The actual density of flowing medium is calculated from the measured temperature. Because the measurement is parallel, the calibrated flowmeter can be calibrated during the measurement.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219326 |
Date | January 2011 |
Creators | Jeřábek, Martin |
Contributors | Zůbek, Tomáš, Šedivá, Soňa |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds