The Diploma Thesis presents a draft of designated automatic apparatus for cutting out and assembling pads for pressure control valve (DRV2). The theoretical chapter of the Thesis contains selected findings from theory and technology for material cutting. The next chapter contains design solutions for a designated apparatus for cutting and assembling pressure control valves. The pads are etched from 0,08 mm steel plates X2CrNi Mol7-12-2. The shape of the pads is etched on a 35mm-wide belt that is wound up onto a drum. The draft of this new technological facility has been elaborated in accordance with the most suitable technological variant. The cutting tool is made of steel 19 437 that is thermally processed at HRC 62-4. Estimated annual volume of production series is 2 mil. pcs. The cutting and assembly processes are executed with the aid of this designated automatic apparatus.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229095 |
Date | January 2010 |
Creators | Kolář, Milan |
Contributors | Štroner, Marek, Dvořák, Milan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0118 seconds