The ultimate shear capacity of prestressed concrete beams is difficult to predict accurately, especially after being in service for an extended period of time. The Utah Department of Transportation asked researchers at Utah State University to experimentally determine the existing shear capacity of 41-year-old prestressed, decommissioned concrete bridge girders and then provide recommendations on how to increase that ultimate shear capacity. This thesis presents the research findings that relate to the existing shear capacity of the prestressed concrete girders. Eight AASHTO Type II bridge girders were tested up to failure by applying external loads near the supports to determine their ultimate shear capacities. The measured results were then compared to calculated values obtained using the AASHTO LRFD bridge design code, and the ACI 318-08 design code. Prestress losses were also measured by means of a cracking test and then compared to values calculated according to the AASHTO prestress loss equations. Both the ultimate shear capacities and the residual prestress forces were used to evaluate the girders after being in service for more than 40 years.
| Identifer | oai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-1587 |
| Date | 01 May 2010 |
| Creators | Osborn, Parry |
| Publisher | DigitalCommons@USU |
| Source Sets | Utah State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | All Graduate Theses and Dissertations |
| Rights | Copyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu). |
Page generated in 0.0015 seconds