During this study, the correlation between the evolution of the prior austenitic grain size and of the precipitation state during thermal treatment performed on steels is presented. To do this, the precipitation state has been finely characterized. Precipitate volume fractions were measured by plasma spectroscopy. Transmission Electron Microscopy (TEM) was used to determine the precipitate size distributions (HAADF images) and the precipitate chemical composition (EDX, EELS for carbon and nitrogen). In order to treat ELLS spectra obtained on complex carbonitrides (V,Nb,Ti)(C,N), a routine based on the Least Mean square Fitting have been developed. Results obtained with this method are in gopd agreement with those obtained by EDX analysis for metallic elements (Nb, V, Ti, ...). Then, grain size distributions were determined using a special etching called "Bechet-Beaujard", which reveals the prior austenite grain boundaries. Two alloys have been characterized in this study. (i) A model alloy, the FeVNbCN, which presents two precipitate types, NbC and VCN. This alloy was chosen to study the role of nitrogen on the precipitation state during reversion treatments. A model predicting the precipitation kinetics, coupled with a model for grain growth, give a good agreement with experimental results on grain sizes, precipitate sizes and on precipitate volume fraction. (ii) An industrial steel, the 16MnCr5+Nb was also studied. This alloy exhibits the presence of AlN and NbC precipitates. The correlation obtained between the Prior Austenite Grain Size and the evolution of the precipitation state shows that a large volume fraction of small precipitates allows a great pinning of grain boundaries. Finally, during thermo-mechanical treatments performed in the industry, some large grains may grow faster than smaller grains, leading to the so-called abnormal grain growth. This kind of growth can lead to undesirable mechanical instabilities. We have developed a criterium for abnormal grain growth which predicts the risk of such growth for a given precipitation state. This model presents a good agreement with all experimental results for both studied alloys.
| Identifer | oai:union.ndltd.org:CCSD/oai:tel.archives-ouvertes.fr:tel-00511322 |
| Date | 05 March 2010 |
| Creators | Leguen, Claire |
| Publisher | INSA de Lyon |
| Source Sets | CCSD theses-EN-ligne, France |
| Language | English |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0021 seconds