<p>Low-density parity-check codes have recently received much attention because of their excellent performance and the availability of a simple iterative decoder. The decoder, however, requires large amounts of memory, which causes problems with memory consumption. </p><p>We investigate a new decoding scheme for low density parity check codes to address this problem. The basic idea is to define a reliability measure and a threshold, and stop updating the messages for a bit whenever its reliability is higher than the threshold. We also consider some modifications to this scheme, including a dynamic threshold more suitable for codes with cycles, and a scheme with soft thresholds which allow the possibility of removing a decision which have proved wrong. </p><p>By exploiting the bits different rates of convergence we are able to achieve an efficiency of up to 50% at a bit error rate of less than 10^-5. The efficiency should roughly correspond to the power consumption of a hardware implementation of the algorithm.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-2794 |
| Date | January 2005 |
| Creators | Blad, Anton |
| Publisher | Linköping University, Department of Electrical Engineering, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
Page generated in 0.0016 seconds