This dissertation presents the calibration-free image sensor modelling process applicable for localisation, such that these are robust to changes in environment and in sensor properties. The modelling process consists of two distinct parts, which are deterministic and stochastic techniques, and is achieved using mechanistic deconvolution, where the sensor???s mechanical and electrical properties are utilised. In the deterministic technique, the sensor???s effective focal length is first estimated by known lens properties, and is used to approximate the lens system by a thick lens and its properties. The aperture stop position offset???which is one of the thick lens properties???then derives a new factor, namely calibration-free distortion effects factor, to characterise distortion effects inherent in the sensor. Using this factor and the given pan and tilt angles of an arbitrary plane of view, the corrected image data is generated. The corrected data complies with the image sensor constraints modified by the pan and tilt angles. In the stochastic technique, the stochastic focal length and distortion effects factor are first approximated, using tolerances of the mechanical and electrical properties. These are then utilised to develop the observation likelihood necessary in recursive Bayesian estimation. The proposed modelling process reduces dependency on image data, and, as a result, do not require experimental setup or calibration. An experimental setup was constructed to conduct extensive analysis on accuracy of the proposed modelling process and its robustness to changes in sensor properties and in pan and tilt angles without recalibration. This was compared with a conventional modelling process using three sensors with different specifications and achieved similar accuracy with one-seventh the number of iterations. The developed model has also shown itself to be robust and, in comparison to the conventional modelling process, reduced the errors by a factor of five. Using area coverage method and one-step lookahead as control strategies, the stochastic sensor model was applied into a recursive Bayesian estimation application and was also compared with a conventional approach. The proposed model provided better target estimation state, and also achieved higher efficiency and reliability when compared with the conventional approach.
| Identifer | oai:union.ndltd.org:ADTP/272586 |
| Date | January 2009 |
| Creators | Lim, Shen Hin, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW |
| Publisher | Awarded by:University of New South Wales. Mechanical & Manufacturing Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Lim Shen Hin., http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0011 seconds