Presented in this thesis is a study of the effects of nano-sized particles used as a catalytic additive in composite solid propellant. This study was done with titanium oxide (titania)-based particles, but much of the findings and theory are applicable to any metal oxide produced by a similar method. The process required for efficiently producing larger batches of nanoparticle additives was seen to have a significant impact on the effectiveness of the additive to modify the burning rate of composite propellant consisting of ammonium perchlorate (AP) and hydroxyl terminated polybutadiene (HTPB). Specifically, titania was seen to be both an effective and ineffective burning rate modifier depending on how the nanoparticle additive was dried and subsequently heat treated. Nanoadditives were produced by various synthesis methods and tested in composite propellant consisting of 80 percent AP. Processability and scale-up effects are examined in selecting ideal synthesis methods of nanoscale titanium oxide for use as a burning rate modifier in composite propellant. Sintering of spray-dried additive agglomerates during the heat-treating process was shown to make the agglomerates difficult to break up during mixing and hinder the dispersion of the additive in the propellant. A link between additive processing, agglomerate dispersion mechanics and ultimately catalytic effect on the burning rate of AP/HTPB propellants has been developed by the theories presented in this thesis. This thesis studies the interaction between additive dispersion and the dispersion of reactions created by using fine AP in multimodal propellants. A limit in dispersion with powder additives was seen to cause the titania catalyst to be less effective in propellants containing fine AP. A new method for incorporating metal oxide nanoadditives into composite propellant with very high dispersion by suspending the additive material in the propellant binder is introduced. This new method has produced increases in burning rate of 50 to 60 percent over baseline propellants. This thesis reviews these studies with a particular focus on the application and scale-up of these nanoparticle additives to implement these additives in actual motor propellants and assesses many of the current problems and difficulties that hinder the nanoadditives’ true potential in composite propellant.
| Identifer | oai:union.ndltd.org:tamu.edu/oai:repository.tamu.edu:1969.1/ETD-TAMU-2010-12-8820 |
| Date | 2010 December 1900 |
| Creators | Kreitz, Kevin R. |
| Contributors | Petersen, Eric L. |
| Source Sets | Texas A and M University |
| Language | en_US |
| Detected Language | English |
| Type | thesis, text |
| Format | application/pdf |
Page generated in 0.0029 seconds