This dissertation performs a simulation investigation into the nonlinear static and dynamic characteristics of electrostatically driven shaped micro-actuators in micro-electro-mechanical systems (MEMS).
The model proposed in the current nonlinear pull-in deflection study considers various boundary conditions for the electrostatically actuated structures, e.g. the cantilever beam and the fixed-fixed beam, and takes account of the electrical field fringing effect and the axial residual stress. Initially, the Adomian decomposition method is employed to evaluate the response of a micro-actuator incorporating a rectangular micro-beam and a flat electrode by obtaining the closed-form solution of the corresponding nonlinear equation. Since no iteration is required in solving the nonlinear deformation, this decomposition method is one of the most efficient methods available for evaluating the unstable pull-in behavior of an electrostatically driven micro-actuator.
The present study implements both small and large deflection assumptions when simulating the response of the micro-actuator in order to explore the possible effects of the two models on the accuracy of the simulation results. The shaped micro-beam with a curved electrode micro-actuator is further assessed using the differential quadrature method (DQM) to examine the influence of the nonlinear pull-in effect. This dissertation also studies the contact force and the pull-in deflection of shaped micro-tweezers. The DQM is employed to solve the nonlinear interaction between the curved electrostatic field force and the corresponding deflection of the shaped cantilever actuators. The numerical results confirm the ability of the DQM to treat this form of nonlinear actuator problem accurately, efficiently and systematically.
To evaluate the dynamic characteristics of the electrostatic micro-actuator, the DQM is applied to solve the natural frequencies of a fixed-fixed shaped beam vibrating around its statically deflected position under electrostatic loading. The proposed model not only takes account of the nonlinear interaction between the curved electrostatic field force and the restoring force of the shaped micro-beam, but also considers mid-plane stretching, axial residual stress, and electrical field fringing effects. It is shown that an excellent agreement exists between the simulation results obtained using the proposed model and those measured experimentally. This study also investigates the micro-beam and electrode shape effect on the natural frequencies of the actuator system. The analytical results indicate that variations in the shape of the micro-beam or of the electrode not only influence the electrostatic field distribution, but also significantly alter the dynamic characteristics of the micro-actuator. Furthermore, the results demonstrate that the shaped micro-beam with a curved electrode micro-actuator increases the working voltage range of the micro-actuator by a factor of approximately six times compared to that of a micro-actuator incorporating a rectangular micro-beam and a flat electrode.
A continuing trend nowadays is the integration of micro-electro-mechanical devices with electronic circuitry to fabricate MEMS devices such as micro-switches, optical micro-mirrors, etc. It is known that when an electrical voltage is applied to these devices, the micro-actuators will undergo a residual vibration before reaching their permanent position. Hence, this dissertation investigates the residual vibration phenomenon of cantilever beam type micro-switches with air squeeze-film damping between the micro-beam and substrate.
The present simulations of various shaped micro-actuators provide an understanding of the nonlinear static and dynamic behaviors of these devices and as such provide designers with the information required to properly and accurately control the device operating range during the design stage.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0708104-201837 |
| Date | 08 July 2004 |
| Creators | Chen, Chao-Jung |
| Contributors | Ying-Chien Tsai, Jao-Hwa Kuang, Der-Min Tsay, Shiuh-Kuang Yang, Chi-Hui Chien, C-K Sung, Rong-Fong Fung, Ming-Hwa Jen, Jong-Shyong Wu |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0708104-201837 |
| Rights | not_available, Copyright information available at source archive |
Page generated in 0.0022 seconds