Increasing consumer demand for new products with high nutritional qualities has spurred a search for new alternatives to food preservation. Pulsed electric field (PEF) is an emerging technology for non thermal food pasteurisation. Using this technology, enzymes, pathogenic and spoilage microorganisms can be inactivated without affecting the colour, flavour, and nutrients of the food. PEF treatment may be provided by applying pulsed electric field to a food product in a treatment zone between two electrodes at ambient , or slightly above ambient temperature. Exposure of microbial cells to the electric field induces a transmembrane potential in the cell membrane, which results in electroporation (the permeabilization of the membranes of cells and organelles) and/or electrofusion (the connection of two separate membranes into one) of the cells. An innovative pulsed electric field (PEF) unit was designed and constructed in the University of Auckland using modern IGBT technology. The system consists of main equipments, the high voltage pulse generator and the treatment chambers. The main focus of this work was to design an innovative PEF treatment chamber that provide uniform distribution of electric field, minimum increase in liquid temperature, minimum fouling of electrodes and an energy efficient system. Four multi pass treatment chambers were designed consisting of two stainless steel mesh electrodes in each chamber, with the treated fluid flowing through the openings of the mesh electrodes. The two electrodes are electrically isolated from each other by an insulator element designed to form a small orifice where most of the electric field is concentrated. Dielectric breakdown inside the chambers was prevented by removing the electrodes far from the narrow gap. The effect of the chambers different geometries on the PEF process in terms of electric parameters and microbial inactivation were investigated. Electric field intensity in the range of (17-43 kV/cm) was applied with square bipolar pulses of 1.7 µs duration. The effect of PEF treatment on the inactivation of gram-negative Escherichia coli ATCC 25922 suspended in simulated milk ultra-filtrate (SMUF) of 100%, 66.67% and 50% concentration was investigated. Treatments with the same electrical power input but higher electric field strengths provided larger degree of killing. The inactivation rate of E coli was significantly increased with increasing the electric field strength, treatment time and processing temperature. Morphological changes on E coli as a result of PEF treatment were studied under transmission electron microscopy (TEM). Significant morphological changes on E coli after PEF treatment were observed. The TEM studies suggested that the microbial inactivation was a consequence of electroporation and electrofusion mechanisms. Kinetic analysis of microbial inactivation due to PEF and thermal treatment of E coli suspended in SUMF were also studied. Comparison between measured (experimental) and predicted (theoretical) variation of E coli concentration with time following the PEF treatment was discussed, taking into consideration the recirculation mode of the PEF treatment. The treated liquid was circulated more than once through the treatment chamber to provide higher microbial inactivation. Arrhenius constants and activation energies of E coli inactivation using combined PEF and thermal treatment were calculated and generalized correlation for the inactivation rate constant as a function of electric field intensity and treatment temperature was developed. / Fonterra Research Institute (NZ) and the Foundation for Research Science and Technology (NZ)
Identifer | oai:union.ndltd.org:ADTP/276495 |
Date | January 2006 |
Creators | Alkhafaji, Sally |
Publisher | ResearchSpace@Auckland |
Source Sets | Australiasian Digital Theses Program |
Language | English |
Detected Language | English |
Rights | Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated., http://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm, Copyright: The author |
Page generated in 0.0656 seconds