This master’s thesis deals with a proposal of production technology of bottom part of charging station which is manufactured by DEL a.s. The component will be made of austenitic steel 17 349 which is 2 mm thick and its production series is 100 pieces a year. Punching and bending by MAG and TIG methods were chosen as the most suitable methods from the considered manufactoring technologies. Stud bolts will be welded by capacitor discharge. Based on the analysis of the technological calculations and the available machines in the manufacturing company was chosen that production is going to run through a punching press Pullmax 720, hydraulic CNC bending press OptiFlex 130 t 3,1 and welding sources TransPuls Synergic 3200, TransTig 1750 Puls and Nomark 65+. Technical and economical evaluation established cost calculation of semi-finished product material, welding wire, gaseous shield and stud bolts. The price of one piece is 3 117,70 Czech crowns.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:399393 |
Date | January 2019 |
Creators | Skalník, Petr |
Contributors | Zavadil, Radek, Podaný, Kamil |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds