The thesis deals with the topic of the punching shear of the reinforced concrete structures with a focus on an additional strengthening. The introduction of the thesis is devoted to the research of various types of strengthening against the punching and their efficiency on an increase of load-bearing capacity. Material nonlinear models are formed for strengthening by an additional concrete head, a slab concrete overlay and a column concrete jacketing. The results from the nonlinear analysis are compared with various standards, including the new generation of Eurocodes. Detailed analysis of an additional concrete head is performed regarding governing inputs, which influence load-bearing capacity. Theoretical assumptions were applied to the design of the additional concrete head, where long-term measurement has been performed for the comparison with the analytical assumptions and the material nonlinear model. The second part of the thesis deals with the strengthening of foundation structures, which are accessible only from one surface. There is presented newly developed technology for strengthening by the additional shear reinforcement with the combination of bonding and mechanical anchorage. The assessment of proposed technology is defined for the strengthening against punching shear based on tested samples. The detailed technological procedure is described, including the procedure for the application on the structures below ground water level. Long-term measurement of the shear reinforcement was carried out for the strengthened foundation slab.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:401593 |
| Creators | Nováček, Jan |
| Contributors | Halvoník,, Jaroslav, Vítek,, Jan, Zich, Miloš |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0065 seconds