This thesis is focused on the effect of glue to bonding strength at DTD-L and ABS edge for increased moisture and heat interaction. This problems is concerned not only furniture, which is located in rooms with increased moisture, as are bathrooms and kitchens, but also furniture, which is exposed to these conditions in logistics during transport, storage etc. In this regard selection of right glue has a great impact on produce quality. This work is divided into two parts, theoretical and practical. There is description of methodology and formal view of problematics in the theoretical part. Experimental measurement of temperature and moisture conditions in interior and exterior are introduced in the practical part. Surface material DTD-L was used in practical part, when was tested strength of glued joints with using PUR adhesive. The samples were burden with increased moisture 90 % and 70 % and with temperatures from 25 ° C to 80 ° C. Subsequently was tested strength of gluent joints with using method of angle pressure shear angle-wise 45 ° and a peeling method angle-wise 90 °. The results were processed, analyzed and evaluated.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:362180 |
Date | January 2016 |
Creators | Landová, Michaela |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0011 seconds