The content of this Master thesis to design installation of hydrogen pressure tanks for airplane VUT RAY 051. Survey was conducted of the available fuel cell on the market. Position of the tank was chosen over the wing using components for mounting a jet engine TJ100 M for aircraft VUT 001 MARABU. For fuel tanks were designed fairings. Further was calculated mass and centre of gravity analysis of aircraft, basic flight performance of aircraft and the drag variation in the location of the tanks above the wing. Further the strain and strength of hinges was calculated.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229318 |
| Date | January 2010 |
| Creators | Koštial, Rostislav |
| Contributors | Juračka, Jaroslav, Píštěk, Antonín |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds